Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
0 Items in Cart
Cart Subtotal
 0,00
View and edit Cart

Specifications

Specifications
More Information
Lamp holderE27
Lamp holder qty1
Light bulbs includedNot included
Max wattage40 watt
Max voltage220 - 240 Volt
Plug typeNot applicable
Fabric composition shade75% viscose | 25% polyamide
Shade dimensions25 x 12 x H. 15 cm
Indoor/outdoorIndoor use/dry locations only

Delivery Time

Most items are in stock.
The approximate delivery time is 2-3 weeks.
In exceptional cases you will be informed by our team by e-mail.

Additional Info

Care instructions

HOW TO CARE FOR LIGHTING WITH A METALLIC FINISH AND GLASS OR ACRYLIC

To maintain the beauty of your luxury lighting, we recommend the following simple guidelines. When cleaning a lamp, make sure you unplug the power cord first. Always make sure sprays or liquids can not get in the lamp fittings.

CLEANING & MAINTENANCE

For general maintenance, periodically dust off your lighting with a feather duster or a soft clean cloth, preferably weekly.

METALLIC FINISHES

Use lukewarm water with a mild household detergent to clean metal finishes. Gently wipe the metallic surfaces, rods and parts with a soft, dampened cloth or chamois. Dry well with a clean, soft cloth. Never use cleaners with ammonia, bleach or hard chemicals and avoid paper towels or scouring pads.

GLASS

Never use abrasive materials for cleaning glass as they may cause scratches. Use appropriate glass cleaning solutions and a microfiber cloth. If you are using a chemical cleaner, take care not to spill it on any of the surrounding metallic finishes. After drying with a soft cloth, you can use a piece of crumpled newspaper to give the glass added shine and sparkle.

ACRYLIC

Avoid commercial household cleaners because the chemicals in these products can dull and craze the acrylic. The best way to care for acrylic surfaces, rods and parts, is to clean with lukewarm water and a bit of liquid soap. Rinse with clear water and dry well. Always use soft cloths for cleaning as not to scratch the acrylic.

HOW TO CARE FOR LIGHTING WITH GLASS, MARBLE, GRANITE, AGATE AND CERAMIC

We recommend following a few simple guidelines to keep your luxury lighting beautiful for as long as possible. Before cleaning a lamp, make sure you unplug the power cord. Always make sure sprays and liquids do not touch the lamp fittings.

CLEANING & MAINTENANCE

For general cleaning, periodically dust your lamp with a feather duster or a soft, clean cloth, preferably weekly.

MARBLE, GRANITE, AND AGATE

Use lukewarm water and some mild soap to clean marble, granite, and agate. Gently wipe the surfaces with a soft, dampened cloth or chamois. Dry thoroughly with a clean, soft cloth. Never use cleaners with acid, ammonia, bleach, or hard chemicals and avoid paper towels and scouring pads.

SILVER-PLATED OBJECTS

Wipe the silver-plated object with a feather duster or a soft cloth to remove any dirt or oil. Dip a clean cloth into silver polish and apply to the surface until a thin film forms. Gently rub the polish into the silver-plated surface with a special polishing cloth made for silver. If you rub too hard, you may remove the thin layer of polish. Remove any excess silver polish with lukewarm water and a small amount of mild dishwashing liquid.

POLISHED STAINLESS STEEL

Wipe the steel down with a soft, dry cloth. We recommend using a foam cleaner to remove fingerprints and other grease or dirt.

OBJECTS WITH A METAL FINISH

Periodically dust polished stainless steel and metal finishes with a feather duster, a synthetic electrostatic duster, or a soft clean cloth or microfiber towel. Remove stubborn stains with clean water or a mild household cleaner such as Pledge Multisurface Everyday Cleaner. Never use hot water or caustic chemicals containing ammonium, chlorine, solvents, or adhesive removers. Avoid paper towels, squeegees, steel wool, scouring pads, razor blades, scrapers, and the like.

Using a soft clean cloth, apply a small amount of the diluted cleaner directly to the cloth then gently wipe the surface. Remove any cleaner residue with a clean damp cloth, then wipe dry. If the finish is not altered and has not been transferred to the cloth, then you can continue cleaning the rest of the product. Complete the process by removing any cleaner residue with a clean cloth dampened with tepid water, then dry with a clean cloth. Do not let air dry.

Regularly polish metal-finished parts with products made especially for the care of polished metals, or with vinegar. For items with heavy staining, polish with undiluted vinegar. Spray a thin layer of vinegar on the item or rub the item with a soft cloth moistened with vinegar. For light polishing, dilute the vinegar with water (1/2 cup of vinegar for every quart of lukewarm water).
metal_glass_lighting_image01_1
newsletter

Subscribe to our newsletter

Stay up to date with our discounts